32
1.10
Connectors/ Headers
1.10.1
IDE Connector: ATA-HDD
This connector supports IDE hard disk drives, optical disk drives and other IDE devices.
If you install two IDE devices on the same cable, you must configure the drives
separately to master/ slave mode by setting jumpers. Refer to IDE device vendor’s documentation
for jumper setting instructions.
1.10.2
Serial ATA Connectors: SATA-1, SATA-2, SATA-3, SATA-4
Please do not fold the Serial ATA cable into 90-degree angle. Otherwise, data loss may
occur during transmission.
