17
3. Installation
1. Unfold the Retention Mechanism.
2. Place the Retention Mechanism over
CPU Slot
3. Push 4 lock pins into holes to fix
Retention
Mechanism on motherboard.
4. Insert CPU. Push two lock pins inward
and press CPU down gently.
Step 1:
Place the Universal Retention Mechanisms over the CPU slot (SC242 slot) on
motherboard.
Step 2:
Fix the Retention Mechanism to the motherboard with four Lock Pins. To insert
the Lock Pins into holes to lock them tight and firmly. And then unfold the URM.
Step 3:
Push the SEC Cartridge’s two locks inward and insert the CPU into Retention
Mechanism. Press the top of CPU gently but firmly until it is fully inserted.
Warning : It is strongly recommended that a heatsink and CPU cooling fan be used to
prevent the CPU from overheating. Applying a thermal of jelly between the CPU and the
heatsink/fan will further cool the CPU.
