BCM IN810ES User Manual Download Page 27 | Manualshive

Page: 27 / 51

background image

27

3. Installation

3.6.13 Additional Connectors

WOL (Wake On LAN, J18)

This header is used for remote wakeup of the computer through a network. WOL requires a
PCI add-in network interface card (NIC) with remote wakeup capabilities. The remote
wakeup header on the NIC must be connected to the onboard Wake on LAN header. For
Wake on LAN, the 5-V standby line for the power supply must be capable of delivering
5VSB

±

5% at 720mA.

Ring In (J23, 2-pin)

This header is used for remote wakeup of the computer through a modem. Ring-In requires
an add-in modem card with remote wakeup capabilities. The remote wakeup header on the
add-in modem card must be connected to the onboard Ring-In header.

CLR CMOS/PWD (JP5)

This Jumper Choose for clear CMOS Setting allows you to clear password or all CMOS
Setting to Default.

SAFE Mode (JP4)

Usually Pentium II/III processors have locked frequency multiples. In this case, there is no
way to exceed the specified multiple whether through motherboard settings or BIOS setup.
With unlock Pentium II/III processors, exceeding the specified multiple is possible through

WOL

USB
Jumper

Front USB
Connector

Ring-In

Fan 2

Fan 1

«
...
25
26
27
28
29
...
»

Summary of Contents for IN810ES




















































Reviews:

No comments

Related manuals for IN810ES

Brand: IEI Technology Pages: 211

Brand: IEI Technology Pages: 8

Brand: IEI Technology Pages: 8

Brand: Uctronics Pages: 27

Analog Devices DC2605A

Brand: Linear Pages: 16

SERVER SYSTEM SR2500AL

Brand: Intel Pages: 210

Brand: IEI Technology Pages: 160

Brand: Maxtang Pages: 13

Brand: Embedian Pages: 70

SUPERO X10DRU-X

Brand: Supermicro Pages: 109

Brand: Intel Pages: 91

Brand: Infineon Pages: 30

GA-HA65M-D2H-B3

Brand: Gigabyte Pages: 104

Brand: Gigabyte Pages: 88

Brand: Gigabyte Pages: 72

Brand: J&W Pages: 36

Brand: TYAN Pages: 35

Brand: TYAN Pages: 58

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands