BCM IN810ES User Manual Download Page 48 | Manualshive

Page: 48 / 51

background image

48

4. BIOS Setup

4.8.6 Parallel P

o

rt Mode

This option specifies the parallel port mode. The Optimal default setting is Normal. The
Fail-Safe default setting is Disabled. The settings are:

Settings

Description

Normal

Default setting.

EPP

The parallel port can be used with devices that adhere to the Enhanced
Parallel Port(EPP) specification. EPP uses the existing parallel port
signals to provide asymmetric bi-directional data transfer driven by the
hose device.

ECP

The parallel port can be used with devices that adhere to the Extended
Capabilities Port(ECP) specification. ECP uses the DMA protocol to
achieve data transfer rates up to 2.5 Megabits per second. ECP provides
symmetric bidirectional communication.

4.8.7 Parallel Port IRQ

This option specifies the IRQ used by the parallel port.

4.8.8 Parallel Port DMA Channel

This option is only available if the setting for the Parallel Port Mode option is

ECP

. It sets

the DMA channel used by the parallel port.

4.8.9 OnBoard Midi Port

This option sets the address of the onboard MIDI connector.

4.8.10 Midi IRQ Select

This option specifies the IRQ for MIDI port. It is not available if you select Disabled in
OnBoard Midi Port.

4.8.11 OnBoard Game Port

This option specifies the address of the onboard game port connector.

4.8.12 Keyboard PowerOn Function

This option allows you to use PS/2 keyboard by pressing any key or specific key.

«
...
46
47
48
49
50
...
»

Summary of Contents for IN810ES




















































Reviews:

No comments

Related manuals for IN810ES

Cypress MB39C502-EVBSK-01

Brand: Infineon Technologies Pages: 28

Brand: AIC Pages: 58

Brand: Renesas Pages: 2

Brand: ECS Pages: 60

Brand: Tekram Technology Pages: 42

Brand: AOpen Pages: 8

Brand: JETWAY Pages: 47

Brand: unicore Pages: 29

Brand: unicore Pages: 28

Brand: Maxim Pages: 33

Brand: Fujitsu Pages: 32

Brand: Fujitsu Pages: 23

Brand: Fujitsu Pages: 40

Brand: Fujitsu Pages: 41

Brand: Fujitsu Pages: 35

Brand: Fujitsu Pages: 34

Brand: Fujitsu Pages: 80

Brand: Fujitsu Pages: 43

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands