manualshive.com logo in svg

BCM GT440ZX, User Manual

Share
Download
BCM GT440ZX User Manual Download Page 54

54

4. BIOS SETUP

On-Chip Secondary IDE

The chipset contains a PCI IDE interface with support for two IDE channels. Select
Enabled to activate the secondary IDE interface.  Select Disabled to deactivate this
interface. The choice: Enabled, Disabled.

USB Keyboard Support Controller

Select Enabled if your system contains a Universal Serial Bus (USB) Keyboard.
The choice: Enabled, Disabled.

Init Display First

This item allows you to decide to active whether PCI Slot or AGP first. The choices:
PCI Slot, AGP.

Power On Function

This item allows you to power on your system in other ways from pressing power
button. The choices: Password, Hot Key, Mouse Left, Mouse Right, Any Key and
Button Only.

Onboard FDC Controller

Select Enabled if your system has a floppy disk controller (FDC) installed on the
system board and you wish to use it.  If you install and-in FDC or the system has no
floppy drive, select Disabled in this field. The choice: Enabled, Disabled.

Onboard Serial Port 1/Port 2

This item allows you to determine access onboard serial port 1/port 2 controller with
which I/O address. The choice: 3F8/IRQ4, 2E8/IRQ3, 3E8/IRQ4, 2F8/IRQ3, Disabled,
Auto.

UART Mode Select

This item allows you to determine which Infra Red(IR) function of onboard I/O chip.
The choices: IrDA, ASKIR, Normal.

Onboard Parallel Port

This item allows you to determine access onboard parallel port controller with which
I/O address. The choice: 378H/IRQ7, 278H/IRQ5, 3BC/IRQ7, Disabled.

Parallel Port Mode  (Activated by Onboard Parallel Port)

Select an operating mode for the onboard parallel (printer) port. Select Normal unless
your hardware and software require one of the other modes offered in this field.

Summary of Contents for GT440ZX


























































Reviews:

No comments

Brands by name

Popular brands

Load more brands