34
BIOS SETUP
4.3.4 Drive A/B and Floppy 3 Mode Support
Select the correct specifications for the diskette drive(s) installed in the computer.
Floppy Mode 3 Support is for LS-120 disk drives if used.
None
No diskette drive installed.
360K, 5.25 in
5-1/4 inch AT-type standard drive; 360-kilobyte capacity.
1.2M, 5.25 in
5-1/4 inch AT-type high-density drive; 1.2-megabyte
capacity.
720K, 3.5 in
3-1/2 inch double-sided drive; 720-kilobyte capacity.
1.44M, 3.5 in
3-1/2 inch double-sided drive; 1.44-megabyte capacity.
2.88M, 3.5 in
3-1/2 inch double-sided drive; 2.88-megabyte capacity.
4.3.5 Video
EGA/VGA
Enhanced Graphics Adapter/Video Graphics Array. For EGA,
VGA, SEGA, SVGA or PGA monitor adapters.
CGA 40
Color Graphics Adapter, power up in 40-column mode.
CGA 80
Color Graphics Adapter, power up in 80-column mode.
MONO
Monochrome adapter includes high-resolution monochrome
adapters.
4.3.6 Halt on
During the power-on self-test (POST), the computer stops if the BIOS detect a
hardware error. You can tell the BIOS to ignore certain errors during POST and
continue the boot-up process. Below are the selections:
No errors
POST does not stop for any errors.
All errors
If the BIOS detect any non-fatal error, POST stops and
prompts you to take corrective action.
All, But Keyboard POST does not stop for a keyboard error, but stops for all
other errors.
All, But Diskette POST does not stop for diskette drive errors, but stops for all
other errors.
All, But Disk/Key POST does not stop for a keyboard or disk error, but stops
for all other errors.