BCI 10 Operation Manual Download Page 34

Page: 34 / 82

Chapter 4: Operating Instructions

4-10

Clinician’s Operation Manual

Choosing the Sensor

WARNING! Use only SpO

sensors and cables supplied with, or specifically intended for use

with, this BCI® oximeter. Use of sensors not intended for use with this device

may cause inaccurate readings.

WARNING! Incorrectly applied sensors may give inaccurate readings.

Refer to the

sensor insert for proper application instructions.

Choose the appropriate sensor from the following chart. Select the sensor based on the patient’s

size, available application site, attachment method and other pertinent clinical information.

See the sensor’s instruction insert for detailed attachment methods and other important

information.

BCI® Sensors

PATIENT

SITE

DESCRIPTION

Adult

over 45 kg

Finger

Finger or Toe

Ear

3044: Sensor, Reusable, Adult

3044S: Spot Check Sensor, Reusable, Adult

3444: Sensor, Reusable, Comfort Clip

3043: Sensor, Reusable, Universal ‘Y’

1300: Sensor, Disposable, Adult Finger

WW3078: Sensor, Reusable, Ear

Pediatric

15-45 kg

Finger

Finger or Toe

Ear

3044: Sensor, Reusable, Adult (>20 kg)

3044S: Spot Check Sensor, Reusable, Adult

3444: Sensor, Reusable, Comfort Clip

3178: Sensor, Reusable, Pediatric Finger (5-45 kg)

3178S: Spot Check Sensor, Reusable, Pediatric

3043: Sensor, Reusable, Universal ‘Y’

1301: Sensor, Disposable, Pediatric Finger

WW3078: Sensor, Reusable, Ear

Infant

3-15 kg

Hand or Foot

Toe

Finger or Toe

3043: Sensor, Reusable, Universal ‘Y’

3025: Sensor, Reusable, Wrap, Infant

1303: Sensor, Disposable, Infant

All

Extension Cable

3311: Cable, Oximetry 1.5 meters (5 feet)

NEONATE SENSORS FOR THE WW1020 ONLY

Neonate

under 3 kg

Hand or Foot

Foot

1302: Sensor, Disposable, Neonate/Small Infant

3026: Sensor, Reusable, Wrap, Neonate/Small Infant

SMALL INFANT SENSORS FOR THE WW1000 ONLY

Small Infant *

under 3 kg

Hand or Foot

Foot

1302: Sensor, Neonate/Small Infant (disposable)

3026: Sensor, Wrap, Neonate/Small Infant (reusable)

*The BCI® 1302 and 3026 oximetry sensors should not be used on neonatal patients with the

WW1000 monitor. Testing has not been conducted for the WW1000 for patients less than 30 days

old. These sensors may, however be used on older patients.

Summary of Contents for 10


















































































Search results

Summary of Contents for 10

Reviews:

Related manuals for 10

Brands by name

Popular brands

BCI 10, Operation Manual

Search results

Summary of Contents for 10

Reviews:

Related manuals for 10

Brands by name

Popular brands