Chapter 4: Operating Instructions
Clinician’s Operation Manual
4-5
AC Power
The AC power supply can plug into the oximeter (Figure 4-3) or into the WW1089 USB interface
cable (Figure 4-4).
Figure 4-3: AC Power Supply
Figure 4-4: Interconnect Cable
Refer to
Chapter 10: Optional Supplies & Accessories
to verify the proper AC power supply for your
application. The following power supplies are suitable for use with this monitor:
CAT. NUMBER
OUTPUT POWER
INPUT POWER
WW1095
30 W
AC power supply 100-240 VAC 50 - 60Hz
WARNING! Only use a power supply intended for use with this monitor. Use of an
inappropriate power supply may cause a patient shock hazard or cause the
oximeter to stop monitoring.
CAUTION! Use only the interconnect cables specifically intended for use with this device.
See
Chapter 10: Optional Supplies & Accessories
, for ordering information.
AC Power
Supply
Power Input
Connector
Connect USB
Cable to Monitor
USB Interface
Cable
AC Power Supply
(Optional)
USB Interface
Cable to PC
Power Input
Connector
Connect AC Power
Here (Optional)
Summary of Contents for 10
Page 2: ......
Page 6: ...Table of Contents iv Clinician s Operation Manual This page is intentionally left blank ...
Page 81: ......
