5
1 Operating Instructions
1.1 PreLIMInAry SWITCh On
Before connecting or disconnecting the probe, ensure that the Duo-Scan 3 power is switched off and
that the probe connector is free from dirt.
Connect the probe to the front connector marked ‘G’.
Rotate the probe connector until the notches on the probe and scanner align, and then screw the
retaining ring clockwise to lock the connector in position.
1.1.2 Imaging display device connection
The Duo-Scan 3 accessories allow the ultrasound image to be viewed on the display headset, monitor or
wrist-mounted display options.
Before connecting an imaging display device be sure the connector is free from dirt.
Displays are connected to the ‘Display’ connector ‘H’.
Make sure the connector is correctly oriented before pushing home and the external threaded metal
lock ring is engaged carefully before tightening gently.
If you are using a wireless monitor you do not need to connect it to the console, and the display
connector cover plug may be left in place. If the monitor uses a video cable, follow the
instructions above.
Duo-Scan 3 manual.indd 5
15/06/2009 21:38
