SSS3416TCS
Owner’s Manual
10
AA
M6 x 15 Bolt
4 PCS
HH
M4 x 12 Bolt
2 PCS
HH
M4 x 12 Bolt
4 PCS
FF
Flat washer
4 PCS
EE
Spring washer
4 PCS
GG
M4 Nut 4
PCS
Step 9 (Side shelves assembly)
a) Loosen the eight pre-installed bolts on both side
shelves and allow 1/4 bolt’s length extend out of
side shelves.
b) Align the holes on the right side shelf (C) with the
holes on the body assembly, Insert the M6 x 15
bolt (AA) into pre-drilled holes, then tighten the
bolts by hand.
c) Repeat the same procedure with the left side
shelf (B) and body assembly.
d) Go back and tighten all the bolts using the
screwdriver provided.
Step 10 (Install the valve with side knob and knob support)
a) Align the holes on the side knob support (Y) with the
hole on the front of the right side shelf and side burner
valve. Insert one M4 x 12 bolt (HH) into the pre-drilled
holes.
b) Tighten all the bolts using the screwdriver provided
c) Press the side knob (Y) onto the side knob support (X).
Step 11 (Install the side burner grate and side
burner frame)
a) Align the holes on the side burner frame (Z) with the
holes on the right side shelf (C).
b) Screw one M4 x 12 bolt (HH), one flat washer (FF),
one spring washer (EE) and one M4 nut (GG) into
each pre-drilled holes by screwdriver provided
c) Put the side burner grate (AB) upon the side burner
frame (Z).
