SSS3416TCS
Owner’s Manual
8
AA
M6 x 15 Bolt
8 PCS
BB
Spring washer
8 PCS
CC
Flat washer
8 PCS
AA
M6 x 15 Bolt
4 PCS
BB
Spring washer
4 PCS
CC
Flat washer
4 PCS
AA
M6 x 15 Bolt
6 PCS
BB
Spring washer
6 PCS
CC
Flat washer
6 PCS
Step 3 (Storage basket and storage basket support assembly)
a) Align the holes on the slide tracks with the holes on the left of
cart base (Q).
b) Screw the M6 x 15 bolts (AA), spring washers (BB) and flat
washers (CC) into the pre-drilled holes of slide tracks, and then
tighten the bolts by hand.
c) Align the holes on the storage basket support (T) with the holes
on the slide tracks.
d) Screw the M6 x 15 bolts (AA), spring washers (BB) flat washers
(CC) into the pre-drilled holes of storage basket support (T), then
tighten all the bolts by hand.
e) Place the storage basket (O) on the storage basket support (T)
f) Go back and tighten all the bolts using screwdriver the provided.
Step 4 (Front beam assembly)
a) Align the holes on cart left side panel (K) with the holes on
front beam (M).
b) Insert one M6 x 15 bolt (AA), one spring washer (BB) and
one flat washer (CC) into each pre-drilled hole, then
tighten the bolt by hand.
c) Repeat the procedure with hole cart right side panel (S)
and front beam (M)
d) Go back and tighten all bolts using the screwdriver
provided.
Step 5 (Cylinder side support and latch
magnet assembly)
a)
Align the holes on the cylinder side support
(V) with the holes on the right side panel (S).
b)
Align the holes in the middle edge of cart
base with the holes on the latch magnet (U).
c)
Insert one M6 x 15 bolt (AA), one spring
washer (BB) and one flat washer (CC) into
the each pre-drilled hole.
d)
Tighten all the bolts using the screwdriver
provided.
