GSF2818KMN
Owner’s Manual
9
Step 10 (Assemble the side bar tool hanger to the side shelves
a) Turn over the left side shelf (D).
b) Align the holes on the end of one side bar tool hanger (C) with the
holes on the left side shelf (D).
c) Insert one bolt (AA), one spring washer (CC) and one flat washer
(BB) into each pre-drilled hole. Tighten bolts by hand until secured.
d) Go back and tighten all bolts using the screwdriver provided.
e) Repeat the procedure for the assembly of right side shelf (V) and
another one side bar tool hanger.
Step 8 (Assemble the body to the cart)
a) Put the body assembly (S) on the top of cart assembly.
b) Align the two holes on the top of cart right side panel with the two
holes on the right of body assembly.
c) Insert one bolt (AA) with one spring washer (CC) and one flat
washer (BB) into each pre-drilled hole.
d) Tighten bolts by hand until secure.
e) Repeat the procedure for the left end assembly.
f) Go back and tighten all bolts using the screwdriver provided.
Attention:
Unpack the regulator/hose assembly (located
underneath the firebox) prior to assembling the grill
body to the cart, and pull out the regulator/hose to the
cart side panel when go ahead to this step.
.
Step 9 Cable assembly
a) Insert the male terminal into the
female terminal and then put the cable
on the clamp pre-installed on the left
side panel and back panel.
