GPF2414C
Owner’s Manual
8
Step 3
Align the holes on front panel (FF) with the
holes on the right frame piece and left
frame piece.
Screwing one M6 bolt (A) into each
pre-drilled hole.
Tighten all bolts using the screwdriver
provided.
Step 4
Insert the wheel axle (HH) into the hole in the right cart.
Put one plastic washer (G) on each end of the axle.
Put one wheel (GG) on each end of the axle.
NOTE: the protruding side of each wheel must face the
cart.
Screwing one wheel nut (F) on each end of the axle
using the wrench provided.
Insert one hub (II) on each wheel.
Step 5
Align the holes on top hook (KK) with the hole on the
top of left frame piece.
Screwing one M6 bolt (A) into the hole.
Align the hole on bottom hook (JJ) with the hole on
the bottom of the left frame piece.
Screwing one M6 bolt (A) into the hole.
Tighten all bolts using the screwdriver provided.
