TOYOTA
TUNDRA D-CAB
2004 -
VSE SUBWOOFER (NON-JBL)
Procedure
4.
Remove Radio
Fig. 4a
(a)
With the center IP removed, use a 10mm
socket to remove the four (4) bolts from the
radio bracket.
(Fig. 4a)
(b)
Pull out the Radio and carefully disconnect
the connectors located behind.
(1)
A NRT may be used to release difficult
connectors from the radio.
Fig. 5a
5.
Disassemble Glove Compartment
(a)
Using the #2 Philips Screwdriver, remove the
2 screws attached to the glove compartment
hinges. (Fig. 5a)
6.
Disassemble Passenger Front & Rear Scuff
Plates & Passenger Front Kick Panel
Fig. 6a
(a)
Remove the front passenger scuff plate by
removing the 4 Philips screws and carefully
pulling upward. (Fig. 6a)
(b)
Remove passenger kick panel by removing
the plastic nut (located near firewall) using a
needle nose plier and pulling out the kick
panel. (Fig. 6b)
Fig. 6b
Fig. 6c
(c)
Remove both rear passenger scuff plates by
removing the 3 Phillips screws (per side) and
carefully pulling upward. (Fig. 6c)
7.
Remove Rear Cab Panel
(a)
Slide the front seats forward.
(b)
Tumble both the passenger and drivers’ rear
seats forward.
Fig. 7a
Fig. 7b
(c)
Remove the rear cab panel
(1)
Release the 2 cargo hangers by pulling on
the head of the hanger. (Fig. 7a & 7b)
Page 3 of 12 pages
Issue: A 12/15/04
