A
3
X
Sport
User Manual V1.0
http://
www.bay-tec.de 4 / 5 [email protected]
Setting Methods
Setting Menu
Press and hold down the button for more than 2 seconds (long press), release it when the LED starts to blink Blue&Red
rapidly. In the setting menu, the LED should be blinking Blue&Red for N times in a loop with the sequence by the chart
below. N stands for the number of the setting function.
Functions
When you reach the function that you wish to operate in, quickly press the button once (short press) to enter it.
Parameters
After entering a function, the color of the LED shows you the settings currently selected. Each short press of the button
advances the option to the next value. When you finish making your selections, just wait for 5 seconds then system will
save the modified and back to the setting menu automatically. The colors corresponding to the options for each
parameter are as shown in the chart below. (* is the default setting).
Exit Setting Mode
When back to the menu, long press the button again to exit the setting mode.
Stick Centering
A3 will perform a stick centering automatically every time it starts, so a manual centering is no longer needed. You
just need to keep all the sticks ( except throttle) in their middle position before power on the controller, and don’t
move them while initializing.
You can change the trims or sub-trims settings in your transmitter anytime you need, the
new center positions will be relearned and saved by the controller next time it starts.
Level Calibration
This function is only used for auto-balance mode, to establish the appropriate level attitude of the plane. After first-
