Bayrol Pool Relax Bromine, Instruction Manual, Page: 45 / 61

13
45
13 Service messages
13.1 Overview
The Service Messages function enables precise planning of certain service procedures:

Calibration (pH, mV, T)
Recommended interval: pH, mV 3 months / temperature 12 months

Electrode replacement (pH, mV)
Recommended interval: 12 months

Hose replacement at dosing pump (pH, mV, O2)
Recommended interval: 12 months
For each service procedure, a time interval in months can be specified in the "Service Intervals" menu (only in the Service menu). After
this period, Pool Relax automatically reminds you that the planned service procedure is due.
By default, all service intervals are set to 0 months and are thus deactivated. To activate this function, an interval of 1...60 months must
be set for the required service procedures. The service message can be deactivated at any time by resetting the value to 0 months.
In the "Service Messages" menu, which can be opened directly from the selection menu, all planned service procedures are displayed
with their due date. If necessary, the planning date calculated by Pool Relax can be changed manually.
A service procedure is displayed as follows:
Calibration pH 09.11.2017
The pH calibration is due on 09.11.2017.
When the due date is reached, the quit button appears instead of the planning date:
Calibration pH Quit
When the quit button is activated, the procedure is re-planned and the newly calculated due date is displayed.
13.2 Signalling of due service messages
Service messages that are due are indicated as follows:

Noticeable flashing of the entire display
The flashing stops as soon as you touch the screen.
 Automatic jump to the "Service Messages" menu
The "Service Messages" menu can be called up any time directly from the selection menu via the menu button.

Acoustic alarm signal
(provided that this function is activated in the "Alarm Settings / Acoustic Alarms" menu)
The acoustic alarm signal stops as soon as you touch the screen.
Note:
Service procedures that are due are indicated on the respective day beginning at 08:00.
13.3 Re-planning of service messages
Pool Relax determines the due date of a service message by adding the set service interval to the current date.
Example:
A service interval of 3 months is set for pH calibration.
A re-planning takes place on 06.12.2017.
The new due date is 06.03.2018.
Service message are re-planned in the following cases:

Change in the service interval in the "Service Intervals" menu

Activation of the quit button of a message that is due

Successful performance of a calibration
(for calibration message only)

The "Re-plan service message" function is opened in the "Service Intervals" menu