![background image](http://html1.mh-extra.com/html/bayrol/naturally-salt-salt-relax-power/naturally-salt-salt-relax-power_operating-and-installation-manual_2713062014.webp)
4 Operating the Salt Relax POWER
14
4.3.2
Lighting
With the Salt Relax POWER, you can switch lighting (e.g. underwater lighting or hall lighting) on and off directly or
via a timer.
The line Lighting shows the selected operating mode (manual or auto) and the current operating state of the
filtration pump (on/off).
To set, select Lighting with
/
and confirm with
The mode is selected in the line Mode using the
/
keys.
Manual
Allows you to switch the lighting on and off manually.
Shows whether the lighting is switched on. Switch using the keys
/
Allows switching to the next light mode in sequence when using a suitable LED light control.
Next colour
Confirm by pressing
to manually activate the next colour on the connected
LED control.
Switching interval
Select the interval here in seconds at which the colours programmed on the
connected LED control automatically follow in sequence.
Automatic (time-controlled)
Switch-on and switch-off times for the lighting are defined.
Use the
/
keys to access the hour for starting the selected timer. Set the hour at which the timer is to
start
/
. Press
to enter the minutes of the starting time and set using
/
. Confirm your entry
with
or reject it with
.
The timer can also be set to switch at certain intervals (daily; every 2 days; every 3 days; every 4 days; every
5 days; weekly; every 2 weeks; every 3 weeks; every 4 weeks). Select the desired switching frequency using
/
.