37
HOW TO REMOVE ARROW SENSOR
The arrow sensor must be removed to replace, or when removing the wheel to replace the solenoid.
Tools Needed:
Phillips Screwdriver
# 2 Square bit
Instructions:
The front plexi must be open or removed to access the arrow sensor.
Refer to “How to Open the Front Plexi” to remove plexi.
Once plexi is removed, remove the 2 screws attaching blocking plate to
the white plastic using a # 2 square bit screwdriver.
Loosen, but do not remove, the 1 bolt using a Phillips screwdriver.
Remove the “Win” arrow metal plate by sliding to the left.
Remove the 2 Phillips screws from the top rail.
The arrow sensor assembly can now be unplugged and removed from the
cabinet.
HOW TO OPEN THE FRONT PLEXI
The front plexi can be removed from the game to allow monthly cleaning.
Instructions:
Remove the back door of the game and set aside.
Open the front door and locate the 2 latches securing the front plexi in
place.
The front plexi will now slide up (like a roll top desk)
and can be removed from the back of the game.
AAPO26000
Arrow Sensor Assy
