background image

19

HOW TO: ADJUST BRAKE

Brake status will show one of three options:

•  Brake OK (no adjustment needed)

•  Tighten Brake
•  Loosen Brake

Open the left side door and locate the brake. 

Pull up each bolt and turn the locknuts left to tighten 
or right to loosen. Move in 2-turn increments; the 
brake is sensitive and needs very little adjustment to 
make a difference. Make sure each bolt is adjusted 
equally. 

Perform another Wheel Coast Time test and check 
the brake status. Repeat previous steps until brake 
status reads OK. 

Wheel Coast Time is determined by how long the wheel spins before it comes to a complete stop. 

Long coast time increases the time per game, while a short coast time makes the game quicker. 

The higher the number, the longer the wheel coasts; the ideal coast time is between 30 and 40. 

Adjusting this number periodically will prevent skilled players from sharking the game. 

To test Wheel Coast Time:

While in the main menu, spin the wheel. The display should read “good spin”. 

Once the wheel stops, the brake status will come up in the diagnostics. 

Summary of Contents for TICKET MONSTER





































Reviews: