Installing and Maintaining the HRPSU
2-6
114312 Rev. C
Figure 2-4.
Cabling with Two 16-Pin Cables
Mounting the HRPSU
You can mount the HRPSU on a flat surface or in a stack with other network
devices. The HRPSU is normally installed at the bottom of a stack, or in a rack
below the devices you intend to attach to it. Your only restriction (as far as where
you place the HRPSU) is the length of cabling necessary to attach the device.
You mount the HRPSU before installing the power supply modules. Once it is in
place, you install all of your power supply modules, then attach the cables to the
network device(s) and the HRPSU.
Mounting the HRPSU on a Surface
The HRPSU does not require any preparation or tools for mounting on a solid
surface. Sturdy non-slip feet are built into the unit to provide a firm grip on the
surface.
Figure 2-5
shows an HRPSU installed at the bottom of a stack of ASNs.
HRP0014A
1
2
3
4
16-Pin
Cables
Connector
Adapter
UL
UL
P 1
P 2
