Bay Networks FastLink II User Manual Download Page 59

Page: 59 / 112

Parameter

Meaning

ConnectNotify

For command line connections only. Set to 0 (disable)

or 1 (enable). If enabled, displays a message box with the

full connection information (name, connection speed,

whether compression or encryption were used, etc.). If

disabled, no message is displayed and no confirmation is

necessary.

DisconnectNotify

For command line connections only. Set to 0 (disable)

or 1 (enable). If enabled, displays a message box when

FastLink II is disconnected with the /D option. If disabled,

no message box is displayed.

SuccessAction

Determines what to do with the FastLink II client if a

successful connection is made from the user interface or

the command line. The default (0) is to have FLINKW

remain active in both cases.

For command line connections, set SuccessAction to:

1 FLINKW is minimized as an icon

2 FLINKW will terminate

For user interface connections, add to SuccessAction:

10 FLINKW is minimized as an icon

20 FLINKW will terminate

Note that the command line and user interface options

are additive, e.g., if you set SuccessAction=21 then

FLINKW will terminate after a successful UI connection,

and minimize after a successful command line

connection.

SuccessAction operations occur after any application

launching and message box displays (e.g., if

ConnectNotify=1).

ConnectText

For all connections. Determines whether the

CONNECT.TXT file is created when a connection is

made. Set to 0 to not create the file, or 1 to create the

file.

Summary of Contents for FastLink II
















































































































Search results

Summary of Contents for FastLink II

Reviews:

Related manuals for FastLink II

Brands by name

Popular brands

Bay Networks FastLink II, User Manual

Search results

Summary of Contents for FastLink II

Reviews:

Related manuals for FastLink II

Brands by name

Popular brands