31
1
Highlight the Password field and enter your assigned password.
The password appears as asterisks as you type, so be careful to enter it correctly.
2
If the Prompt for password box is checked, uncheck it.
You can also specify that your password is required each time you connect.
1
If the Password field is not blank, highlight it and press
[Del]
to remove any password you may have
previously entered.
2
Check the Prompt for password box.
Phone number
This is the phone number of the server. Your Administrator can supply you with this number. Your modem uses
this number to gain access to the network.
To specify the phone number, highlight the Phone number field and enter the phone number of your server. If
any special access codes or modem controls (such as pauses) are required, be sure to include them.
Dialback
Dialback is a two-step process. First, your PC dials the server, and, after exchanging some information such as
your phone number, both sides hang up. Then the server dials your PC and establishes a connection.
If you want to use dialback:
1
Check the Request dialback box.
2
Highlight the Dialback number field and enter the phone number of your modem.
If you don’t want dialback, uncheck the Request dialback box.
You can also leave it up to the server as to whether to use dialback. Just uncheck the
Request
dialback
box, but enter a phone number in the
Dialback number
field in case the server
elects to use dialback.
