111
Static IP Address Configuration
Configuring Reflection for a static IP address requires configuring both Reflection and FastLink II for the same
static IP address.
To configure Reflection for a static IP address:
1
Click on the Network Configuration icon in the TCP/IP Windows group. Select the TCP/IP
category button on the left-hand side.
2
To configure a static IP address you need to edit the IP Address field. If the IP Address field is
greyed out (not editable), press the [Remote] button, and then turn off the Enable Remote
Configuration checkbox.
3
Enter your static address into the IP Address field.
4
Edit the Subnet Mask field to match your local mask.
5
If your gateway is not yet present in the Gateways list box, click on [Add], and enter the address of
your gateway.
To configure FastLink II for a static IP address:
1
Run FastLink II, and select the Connections button at the left of the screen. Highlight the Connect
drop-down box, and select the connection whose settings you want to set for your IP connection.
2
Click on the [IP Protocol Settings] button, and check the Static IP address button.
3
Highlight the Address field and enter your static IP address.
