Installing the BayStack Advanced Remote Node
114200 Rev. A
1-21
Connecting a Terminal Console
You need both pieces in the ARN console/modem cable kit (Order No. 110310) to
connect a terminal console:
•
Order No. 110307 serial console/modem cable (with 9-pin receptacle to
25-pin plug connectors)
•
Order No. 110308 null modem crossover adapter (with two 25-pin receptacle
connectors)
Once you have the appropriate equipment, complete the following steps:
1.
Power on and configure the console, using the parameters in
Table 1-3
.
Refer to the console user manual for instructions.
2.
Power off the console.
3.
Attach the null modem crossover adapter to the 25-pin cable connector.
4.
Insert the screw on the cable connector into the receptacle on the adapter
connector and tighten the screw
(Figure 1-14)
.
Figure 1-14.
Attaching the Null Modem Adapter
Table 1-3.
Console Parameters
Parameter
Value
Baud Rate
9600
Data Bits
8
Stop Bits
1
Parity
None
Null modem adapter
Console cable
Screw receptacle
Rotate to tighten screw
AN0010A