manualshive.com logo in svg

Bay Networks BayStack 350, Using Manual, Page: 62 / 248

Share
Download
Bay Networks BayStack 350 Using Manual Download Page 62

Using the BayStack 350 10/100/1000 Series Switch

1-38

304376-B Rev 00

IGMP Snooping Configuration Rules

The IGMP Snooping feature operates according to specific configuration rules. 
When configuring your switch for IGMP Snooping, consider the following rules 
that determine how the configuration reacts in any network topology:

•

A port that is configured for port mirroring cannot be configured as a Static 
Router port.

•

If a MultiLink trunk member is configured as a Static Router port, all of the 
MultiLink trunk members are configured as Static Router ports. Also, if a 
Static Router port is removed, and it is a MultiLink trunk member, all 
MultiLink trunk members are removed as Static Router port members, 
automatically.

•

Static Router ports must be port members of at least one VLAN.

•

If a port is configured as a Static Router port, it is configured as a Static 
Router port for all VLANs on that port. The IGMP configuration is 
propagated through all VLANs of that port.

•

If a Static Router port is removed, the membership for that port is removed 
from all VLANs of that port.

•

The IGMP Snooping feature is not STP dependent.

•

The IGMP Snooping feature is not Rate Limiting dependent.

•

The Snooping field must be enabled for the Proxy field to have any valid 
meaning.

•

Static Router ports are configured per VLAN and per IGMP Version.

For more information about using the IGMP Snooping feature, see “IGMP 
Configuration” on page 3-48.

See also Appendix C, “Quick Steps to Features” for configuration flowcharts that 
can help you use this feature.

Note: 

Because IGMP Snooping is set up per VLAN, all IGMP changes are 

implemented according to the VLAN configuration for the specified ports. 

kombk.book  Page 38  Thursday, February 18, 1999  10:59 AM

Summary of Contents for BayStack 350

























































































































































































































































Reviews:

No comments