manualshive.com logo in svg

Bay Networks BayStack 350, Using Manual, Page: 143 / 248

Share
Download
Bay Networks BayStack 350 Using Manual Download Page 143

Using the Console Interface

304376-B Rev 00

3-31

 

Figure 3-14.

Port Configuration Screen (2 of 2)

Table 3-12

 describes the

 

Port Configuration screen fields.

Note: 

When a gigabit MDA is installed, only the Status field for that MDA 

port is configurable. See 

“High Speed Flow Control Configuration

” on 

page 3-32

 to set the autonegotiation field for the gigabit MDA port. The 

gigabit MDA only supports 1000 Mb/s in full-duplex mode.

Table 3-12.

Port Configuration Screen Fields

Field

Description

Port

Indicates the switch port numbers that correspond to the field settings in that row of 
the screen (for example, the field settings in row 2 apply to switch port 2). Note that 
the settings applied in the All row (bottom row) affect all switch ports (except the 
gigabit MDA port, when installed).

(continued)

                               Port Configuration

   Port   Trunk      Status      Link   Auto Negotiation     Speed  Duplex
   ----   -----   ------------   ----   ----------------   -----------------
    15            [ Enabled  ]   Up       [ Enabled  ]     [ 100Mbs / Full ]
    16            [ Enabled  ]   Down     [ Disabled ]     [ 100Mbs / Half ]
    17      1     [ Enabled  ]   Up       [ Disabled ]     [ 100Mbs / Half ]
    18            [ Enabled  ]   Down     [ Disabled ]     [ 100Mbs / Half ]
    19      3     [ Enabled  ]   Up       [ Disabled ]     [ 100Mbs / Half ]
    20      3     [ Enabled  ]   UP       [ Disabled ]     [ 100Mbs / Half ]
    21            [ Enabled  ]   Down     [ Disabled ]     [ 100Mbs / Half ]
    22      4     [ Enabled  ]   Up       [ Enabled  ]     [ 100Mbs / Full ]
    23      4     [ Enabled  ]   Up       [ Enabled  ]     [ 100Mbs / Full ]
    24            [ Enabled  ]   Down     [ Enabled  ]     [ 100Mbs / Full ]
    25      1     [ Enabled  ]   Up       [ Enabled  ]     [ 100Mbs / Full ]
    26      1     [ Enabled  ]   Up       [ Enabled  ]     [ 100Mbs / Full ]
    27            [ Enabled  ]   Down     [ Disabled ]     [ 10Mbs  / Full ]
    28            [ Enabled  ]   Down     [ Disabled ]     [ 10Mbs  / Full ]
    All           [ Enabled  ]            [ Disabled ]     [ 10Mbs  / Full ]

Press Ctrl-P to display choices for ports 1-14.
Use space bar to display choices, press <Return> or <Enter> to select choice.
Press Ctrl-R to return to previous menu.  Press Ctrl-C to return to Main Menu.

kombk.book  Page 31  Thursday, February 18, 1999  10:59 AM

Summary of Contents for BayStack 350

























































































































































































































































Reviews:

No comments