Bay Networks Bay Dial VPN, Configuration And Troubleshooting Manual

Page: 87 / 186

Configuring TMS Using Local RADIUS
115623B Rev. 00 BayStream Multiservice Software Version 7.2 6-7
Gateway Accounting Messages
The gateway sends messages to the customer RADIUS server accounting for the
inbound usage. These messages are equivalent to the user’s authorized service, as
if the user had dialed in locally, with the addition of tunnel accounting
information.
Table 6-2
summarizes the messages that the gateway sends to the
customer’s RADIUS server.
User Stop Message
Acct-Status-Type Stop
NAS-IP-Address, Port,
Port-Type Connection origination of call
Username The original contents of the user field
Calling-Station_ID
Called-Station-ID Either or both, if applicable
Service-Type As user authorized
Tunnel-Type DVS or L2TP
(for Dial VPN, only DVS is valid)
Tunnel-Media-Type IP
Acct-Client-Endpoint A string containing the IP address of the accounting client
system, and possibly other system-specific identifiers
Tunnel-Server-Endpoint A string containing the IP address of the tunnel server,
the circuit type, and an optional identifier.
Acct-Tunnel-Connection-ID A unique identifier generated on each end of the session
to identify this particular user tunnel session. Typically,
this is a numeric string encoding a tunnel identifier and/or
sequence number.
Statistics Connect time, bytes, messages in, messages out
Table 6-1. Service Provider Accounting Messages
(continued)
Message Type/Field Name Contents