Bay Networks Bay Dial VPN, Configuration And Troubleshooting Manual

Page: 79 / 186

Configuring TMS for an erpcd-based Network
115623B Rev. 00 BayStream Multiservice Software Version 7.2 5-11
Alternatives to the Default Database
You can substitute a relational database of your own choosing for the default
ndbms database supplied with Dial VPN. If you do so, use that database’s
command language to manage the database contents. The database must contain
the same information as the default database. For information on how to replace
the default database, contact the Bay Networks Technical Solutions Center.
config
rases
ordered
stats
all Used only with the show command,
config displays the configuration
information (entered with an add or
modify command) for the entry.
Showing rases displays the current list
of remote access servers that have
active connections to the specified
domain, and the number of users
connected to each RAS. Clearing rases
sets the current user counts and RAS
list to 0.
Showing stats displays the number of
GRANTs and DENYs. Clearing stats
resets the GRANT and DENY counters
to 0.
Showing ordered displays the current
list of remote access servers sorted in
ascending order.
Showing all displays config, ordered,
and stats information. Clearing all
clears both users and stats.
An error is returned if the entry is not
found, but it is not an error to clear an
already cleared entry.
show requires exactly one
of these arguments, along
with domain and dnis.
clear requires exactly one
of these arguments, along
with domain and dnis.
list can optionally use
ordered to sort the list of
domain/DNIS pairs
alphabetically, by domain,
then DNIS.
Table 5-2. tms_dbm Command Arguments
(continued)
Argument Function
Used with These
Commands