manualshive.com logo in svg

Bay Networks Bay Dial VPN, Configuration And Troubleshooting Manual

Share
Download
Bay Networks Bay Dial VPN Configuration And Troubleshooting Manual Download Page 103

Configuring IPX as the Routing Protocol

115623B Rev. 00

BayStream Multiservice Software Version 7.2

8-7

 

Configuring the CPE Router Frame Relay Connection with IPX

Configure the COM1 serial link to the frame relay cloud exactly the same way, 
except that the network number for that interface is 0x0000ABCDEF and the 
encapsulation type for that link is SNAP. The following steps describe the process.

1.

From the Site Manager window, use the Tools menu to select 
Configuration Manager in dynamic mode.

The path is Site Manager > Tools > Configuration Manager > Dynamic.

2.

Click the interface that you want to configure.

This example configures frame relay on the circuit designated COM1. The 
Edit Connector window appears.

3.

Click Edit Circuit.

The frame relay Circuit Definition window appears.

4.

Click Services.

The frame relay Service list window appears.

5.

From the Protocols menu, select Add/Delete.

6.

Click the check boxes for the IPX and RIP/SAP protocols, then click OK.

The Frame relay Service List window reappears.

7.

Enter your Novell Configured Network Number in hexadecimal format, 
then make sure that the Configured Encapsulation parameter is correctly 
set for that interface and click OK.

This completes the CPE router Ethernet and Serial interface configuration for 
IPX.

Summary of Contents for Bay Dial VPN



























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands