Baxi SILA RCT MINI, Installation, Function And Maintenance Instructions

Page: 48 / 72

48
ENGLISH
Component Qtà
Heat Recovery Unit 1
Fixing Bracket & Screws 2
6mm x 19mm/21.5mm Condense Adapter 1
Straight Hose Connector 1
Installation, Servicing & Maintenance Instructions 1
Controller 1
Grille 1
Grille mounting frame 1
GENERAL DESCRIPTION
SILA RCT MINI is a residential heat recovery unit system equipped with speed selector (3 velocities) and by-pass. This
units has beeen designed in order to guarantee a continuous air exchange into the home ambient, by mean a piping and
grid network. Heat is recovered from the “dirty air” expelled from the room, using a high performance heat exchanger, and
transfered to the “fresh” supplied air. The extracted air is then discharged to outside via a single duct and grille.
The recovery unit is also equipped with a warning system for filter maintenance. (for info, see paragraph CLEANING THE
FILTER).
The case is constructed in aluminium/zinc coated steel. Internal faces of the casing are acoustically lined with flame
retardant acoustic foam.
NOTE: For additional ancillary equipment (e.g. ducting. grilles etc.) contact the Sales Department.
Figure 2a and 2b. SILA RCT MINI with a cut out section showing the fans & PCB.
FIGURE 2. EXPLODED FEATURES
Suspended Unit Only
12 Condensate Tray
13 Magnetic Filter Cover
14 Filters
15 Front Cover Assembly
16 Access Cover to Controls
17 Front Cover Screws
CARTON CONTENT
COMPONENT CHECK LIST
12
14
17
13
13
16
15
2a