Baxi SILA RCT MINI, Installation, Function And Maintenance Instructions

Page: 49 / 72

49
ENGLISH
BUILDING STANDARD & REGULATIONS
BUILDING STANDARD & REGULATIONS
The appliance must conform to those in the contry where it’s used.
SAFETY INFORMATION
Ensure the mains supply voltage, frequency, number of phases and power rating comply with details on the rating
label unit.
All wiring must be in accordance with the appropriate standards. The equipment must be provided with a local triple pole
isolator switch.
Ensure safety regulations and practices are adhered to when installing and using this equipment.
Do not install this appliance where it is liable to be subject to water spray or where ducted air ambient temperature may
exceed 40˚C.
When the unit is used to handle moist air, a suitable condensate trap and drainage system should be incorporated in the
exhaust duct to ensure safe and healthy operating conditions as per the relevant standard.
DO NOT use this appliance where excessive moisture, excessive dust or fibres, grease or oil laden air.
When installing the unit, take care not to damage electrical or other hidden utilities.
Exhaust air must be vented to the outside.
The fan motors are fitted with sealed for life bearings and therefore does not require lubrication.
2b
21
19
18
Main PCB
20
FIGURE 3. PCB & RTC PCB FEATURES
18 RV1 Speed Adjuster
19 RV2 Speed Adjuster
20 Installer Mode Switch
21 LED Light
TERM.BLOCK
BLINKING
RED LED
PULSANTE INSTALLATORE
TERM.BLOCK
DIP SWITCH
RV2
FRESH
AIR
IN
RV1
EXHAUST
AIR
OUT
INSTALLER MODE SWITCH
FILTERS