31
0006080100
VANDMÆNGDE (l/h)
PUMPETR
YK (MVS)
PUMP
PRESSURE
Diagram 2
Afløb
kedel
Afløb
varmtvands-
beholder
Bypass indstillingsskrue
Photograph 1
Krav til vandmængde/
pumpetryk ved varmefladerne
Pumpen har en stor løftehøjde og er egnet til alle anlæg med 1-strengs-
eller 2-strengssystem. Pumpehuset har indbygget en automatisk
udluftningsventil, der muliggør en hurtig udluftning af varmeanlægget.
Pumpen er beregnet til drift med maksimal omdrejning (trin III). Drift i
trin I bør undgås, da Q-H-karakteristikken ikke svarer til de krav, der stilles
til normal drift.
Afløb kedel og
varmtvandsbeholder
Bypass indstilling
For at forenkle aftapning af varmeveksleren kan der installeres en hane
(48), som anbringes ved siden af varmeveksleren (se fig. 12).
9606100601
Requirements regarding water
quantity/pump pressure at the
heating surfaces
The pump has a large head and is suitable for all appliances with a single
or double-pipe system. The pump housing incorporates an automatic
ventilation valve, which allows rapid ventilation of the heating system.
The pump is intended for operation at maximum speed (phase III).
Operation in phase I should be avoided, as the Q-H characteristic does not
conform to the requirements laid down for normal operation.
PHASE II / III
AMOUNT OF WATER
Boiler drain
Hot-water
cylinder drain
Bypass setting screw
Draining the boiler and hot-
water cylinder.
Bypass setting
In order to simplify draining of the heat exchanger, a tap may be installed
(48), which is fitted at the side of the heat exchanger (see fig. 12).
