Baxi Bioflo, Installation & Servicing Instructions Manual

Page: 7 / 52

6
For the Installer
2.1 Delivery, packaging
Hydraulic equipment FireWIN type/order no.
without heating fittings FW_ 090 FW_ 120
with circulation pump, expansion tank 12 l, motorised mixing valve,
safety valve and pressure gauge
FW_ 090 UAM FW_ 120 UAM
with circulation pump, hot water tank feed pump with gravity brake,
expansion tank 12 l, motorised mixing valve, safety valve, pressure
gauge and supplied gravity brake for heating circuit
FW_ 090 UAML FW_ 120 UAML
2.1.1 FireWIN Klassik
The boiler is supplied on a wooden pallet covered with a plastic sack. The cladding parts are in a separate card-
board box. Cleaning tools are packed in the combustion chamber and the ash pan.
2.1.2 FireWIN Premium and Exklusiv
The boiler is supplied on a wooden pallet covered with a plastic sack. The cladding parts are in a separate card-
board box. Cleaning tools are packed in the combustion chamber and the ash pan. In addition, the suction tur-
bine (fully automated pellet feed) is packed in a cardboard box.
2.1.3 Optional accessories
(acc. to price list and order)
– MES system control
Heating controlled by outside tempe hot water tank, subsequent expansions possible
– REG standard control
Heating controlled by outside tempe hot water tank, no expansion possible
– Exhaust gas sensor in protective tube – JW-010
installed in the exhaust pipe – flue gas temperature is shown on the InfoWIN display
–
Ash pan for heating surfaces
– FIRE 020
facilitates cleaning or unloading of the ash from the heating surfaces
– Heat shield – FIRE 023
patented cover for the front window to reduce heat radiation during summer operation
– Adapter for external combustion air supply – FIRE 024
already integrated in the boiler if ordered; connection for plastic pipes Ø 75 mm.
– Covering screen, platinum silver – FIRE 025
140 mm deep, for covering the boiler connections at the side and rear
– Covering screen, quartz beige – FIRE 026
140 mm deep, for covering the boiler connections at the side and rear
–
Mounting pedestal for FireWIN
– FIRE 022
for initial installation without finished floor screed
–
Fully automated feed unit
– FIRE 040
with maintenance-free suction turbine in storage room and standard hose connection downwards.
– Hose connection at top for feed unit – FIRE 041
– Fully automated changeover unit with 3 pcs. Suction wands – PMX 042
– Delivery and return air hose with earthing DN 50/25 m – PMX 013
– Metal pipes for delivery and return air straight – FIRE 044
for routing the feed hoses downwards close to the exhaust pipe without fire risk
– Metal pipes for delivery and return air curved – FIRE 045
– for routing the feed hoses to the left/right close to the exhaust pipe without fire risk