Baxi Bioflo, Installation & Servicing Instructions Manual

Page: 41 / 52

40
Hysteresis Burner ON
Switching hysteresis for burner control – Fig. 61.
Factory setting: 5 K
Setting range: 0 – 20 K
Fig. 61
Hysteresis
Burner ON
Save
– Yes No + +
5
K
For the Service Technician
Number of burner starts
The number of burner starts of the FireWIN is displayed – Fig. 58.
Fig. 58
Fig. 59
Number of
burner starts
Back
1.350
Delivery time ignition phase
Fuel quantity in the ignition phase – Fig. 60.
Fig. 60
Delivery time
ignition phase
Save
– Yes No + +
120
s
Fuel quantity auger conveyor
The calculated fuel quantity (actual value) and the range is displayed in kg/h,
and can be adjusted – Fig. 59.
FireWIN FW 90 FW 120
Actual
value
Factory setting:
Setting range: 6.0 kg/h
±2 kg of range
6.0 kg/h
±2 kg of range
Range
Factory setting:
Setting range: 6.0 kg/h
6.0 – 8.0 kg/h
6.0 kg/h
6.0 – 8.0 kg/h
Correc-
tion
Factory setting:
Setting range: 0
±5
0
±5
FireWIN FW 90 FW 120
Factory setting: 120 s 100 s
Setting range: 100 – 150 s 80 – 130 s
4.5.1 Parameters
The following parameters can be selected with the arrow buttons, then confirmed using the Choose button.
– Number of burner starts
– Fuel quantity auger conveyor
– Delivery time ignition phase
– Hysteresis Burner ON
– Maximum value of set temperature
– Set temperature ext. heating requirement
– Type of pellet feed system
– Operating time of suction turbine
– Profile ash removal
– Correction of cleaning interval
– Air intake/exhaust flap
– Limits for blower speed
– Install display module
– Language
– Installation
Fuel quantity
Auger conveyor
Actual value 6.0 kg
Range 6.0 kg
Correction 0
Choose Back