4
© Baxi Heating UK Ltd 2009
2.0 Locating the Transmitter
2.1
Location
1.To ensure optimum operation of the
appliance and to achieve the desired
comfort levels the Programmable Room
Thermostat Transmitter must be correctly
located (Fig. 3):-
• In the main room of occupation
• Away from sources of
heat/light/draught
• On an internal wall at a height of
approx. 1500mm*
*Alternatively the Transmitter can be fitted
with the supplied plinth to allow free
standing on, for example, a sideboard or
shelf. It is recommended that the
Transmitter is operated free standing for a
period in several locations to determine the
best position.
2. It is important that no large metal objects
or mirrors are placed between the
Transmitter and Receiver, as they may
interfere with the Radio Frequency signal.
This could prevent the appliance working or
cause intermittent operation.
2.2
Fitting
(Fig. 4)
1. Remove the cover by inserting a
screwdriver and twisting as shown.
2. Remove the batteries and insulating strip.
3. Select a suitable position for fitting and
mark the wall through the backplate, or fit
the free standing plinth (see above).
4. Once the optimum position has been
established drill & plug the wall (if wall
mounting). Secure the Transmitter with the
screws supplied and refit the batteries.
Replace the cover.
Min. 200 mm
1500 mm
AUTO
PROG
AUTO
PROG
PRO
Fig. 3
Fig. 4
