8
© Baxi Heating UK Ltd 2009
5.0 Setting the Transmitter
5.3
Programming
(Fig. 12)
1.The default programme is ‘Hi’ mode. set
for operation from 06:00 A.M. to 11:00
P.M. each day of the week.
2.To change the programme turn the
Selector Knob to the position.
3.The first ‘time slot’ will flash off & on.
4. Choose or for each hour, or press
to go to next change in programme.
Press to select Lo mode for the hour or
for Hi mode.
Once done press ‘
OK
’ for next day, or:-
Quick Programming
.
To apply the same programme to the
following day press and hold ‘
OK
’ for 3
seconds until the programme for the
following day is displayed.
5.Turn the knob to exit the setting mode.
5.4
Automatic Mode
(Fig. 13)
1.Turn the Selector Knob to the
position.
2. When starting, the temperature
measured by the Transmitter is displayed
with the symbol above the ‘°C’. Press ‘ ‘
for 3 seconds to display the set-point
temperature.
3. It is not necessary to operate the set
programme. If required one of the
‘continuous’ modes can be selected.
Turn the Selector Knob to:-
for continuous Lo
for continuous Hi
for continuous Frost Protection
PROG
Lo mode
for 1 hour
for 1 hour
Go to the next
program change
Confirm and go to
the next day
1
st
time
slot
Time slot
consulted
Day
Program
profile
Hi mode
AUTO
PROG
AUTO
Holiday
mode
Switches current mode,
e.g. Hi to Lo,
or vice versa
Manual temperature mode
(from 30 minutes to 72 hours)
Time
Current setting
(e.g. Hi)
Day (e.g. Tuesday)
Burner On
indicator
Measured
temperature
Fig. 12
Fig. 13
