Page 4
INSTALLER GUIDE
©
Baxi Heating U.K. Limited 2007.
CONTENTS
Section
Heading
Page
1. SAFETY
5
2. APPLIANCE DATA
6
3. GENERAL INSTALLATION REQUIREMENTS
7
4. PACK CONTENTS
16
5. FIREPLACE CHECK
20
6. IGNITION CHECK
21
7. GAS SUPPLY CONNECTION
22
8. PREPARING APPLIANCE FOR INSTALLATION
22
9. CONVECTION BOX INSTALLATION
25
10. BURNER AND SUPPLY PIPE INSTALLATION
28
11. CERAMIC WALLS INSTALLATION
30
12. FASCIA AND CONTROL LINKAGE
31
13. FITTING THE CERAMIC FUEL EFFECT
34
14. FRONT / CASTINGS INSTALLATION
34
15. FULL OPERATING CHECKS
36
15.1 Checking the control settings.
36
15.2 Check for spillage.
36
15.3 Flame supervision and spillage monitoring system.
37
16. FINAL REVIEW
38
17. SERVICING & PARTS REPLACEMENT
39
17.1 Checking the aeration setting of the burner.
40
17.2 To remove the ignition microswitch.
40
17.3 To remove the gas shut-off microswitch.
40
17.4 To remove the fascia.
41
17.5 To replace the control slide unit.
42
17.6 To replace the control slide button.
43
17.7 To remove the complete burner unit.
43
17.8 To remove the electronic ignition generator.
44
17.9 To remove the thermocouple interrupter block.
44
17.10 To remove the pilot unit.
45
17.11 To remove the shut-off tap.
45
17.12 To remove the gas flow rate controller.
46
17.13 To replace the burner.
46
17.14 To remove the main burner injector.
47
17.15 To remove the appliance from the fireplace.
47
