CDR Series
Installation Instructions
8
CAUTIONS
In order to avoid damaging the camera note the following points.
1) The camera has threaded mounting points on the top and bottom of the case.
Only use a standard, photographic, mounting-bolt with a 1/4-20 UNC thread.
2) Before fitting the lens make sure that its back will not touch the CCD sensor or
associated components when screwed fully home.
3) Do not touch the image-surface of the sensor. If the sensor is accidentally
touched, only clean it using ethyl alcohol.
4) Do not expose the sensor to direct sunlight as this may impair the performance
of the camera.
5) The maximum weight of the camera is 0.55kg.
6) Only use the camera in a clean, dust-free environment.
7) For outdoor use, an appropriate protective housing conforming to IP65 or UL50
or better must be used.
CONNECTORS AND CONTROLS
(9)
(8)
(11)
Side View
Top View
(10)
(6)
(1)
(2)
(3)
(4)
(5)
(7)
1.
External sync input (genlock) BNC
2.
Video iris lens connector
3.
Low-voltage power supply terminals (12 VDC/24 VAC)
4.
Composite video output BNC
5.
S-Video output connector
6.
Power LED
7.
Comms I/O
8.
Joystick (under side flap)
9.
DD Lens connector
10.
Back focus adjustment screws
11.
1/4-20 UNC mounting bush (fitted
at top and bottom)
