Installation Instructions
CDR Series
41
SET ADVANCED PASSWORD
****
USE ARROW KEYS
PRESS SELECT WHEN DONE
SET BASIC PASSWORD
****
USE ARROW KEYS
PRESS SELECT WHEN DONE
BASIC AND ADVANCED PASSWORDS
The Set Passwords menu item is used to set the passwords that are used to access the
Basic and Advanced menus. Select the password you want to change, and the appropriate
set password screen will be opened as shown below.
Note that the first digit of the password is selected. To change the password, the up/down
arrow keys or joystick are used to select the required number for each of the four digits in
the password. An up/down movement of the arrow keys or joystick will cause the selected
digit to either increment or decrement. When the digit is correct, use the left/right arrow
keys or joystick to move to the next digit of the password. When all four numbers have
been set, press the select key.
Important Notes
The Advanced and Basic factory default password is 0 0 0 0, and until new basic and
advanced passwords have been specified there is no control over the access to the camera
menu system.
If only the basic password is specified, access to the camera menu system will remain
unrestricted as the factory default advanced password will still be available. If only an
advanced password is specified, the advanced menus will be secure but access to basic
menus will remain unrestricted. Only when both the basic and advanced passwords have
been changed will access to both basic and advanced menus be secure.
For this reason,
we strongly recommend that the camera passwords are changed by the installer as
soon as possible to prevent unauthorised access to the menu system.
The passwords 1 1 1 1 and 9 9 9 9 are reserved and may not be used.