Here’s what the completed connections will look like:
PLEASE NOTE:
When making these connections, please keep in mind that the wires at the original BMW
harness are twisted in pairs. These pairs MUST remain together when making your connections since there
may be multiple instances of the same wire color and there would be no way to identify which wire is
appropriate for which connection if the wires are separated.
4.
Double-check your connections!
With the variety of wire colors and the number of wires present
in this area of the trunk, it’s easy to make a mistake. Before going any further, it’s absolutely worth
your time to insure that you’ve made the right connections. Go over the connections you’ve made
one more time being sure to verify colors are correctly matched and correct any mistakes, if
present.
5.
Go ahead and plug in your RCA cables into the LOC, and then clean up your work with a couple of
the supplied wire tires. This will not only make your install look nice, but ensure that all connections
remain solid over time.
Preparing the trunk for the enclosure installation
You’ll notice that we’ve sent two sets of enclosure mounting hardware, one set for fold down seats and the
other set for non fold down seats.
7 of 13
Any reproduction, distribution, modification, or dissemination of these instructions without written permission from Bavarian Soundwerks is
expressly forbidden and a violation of international copyright law. Any violation will result in prosecution to the full extent available under the
law!
© Bavarian Soundwerks, LLC.
2195 Defoor Hills Rd., Suite D, Atlanta, GA 30318
P: 404.963.8857 |
www.bavsound.com
