BMW E46 Subwoofer System by BSW Installation Guide:
d110.e46s for BMW 3 Series Sedan ’99-’05 (E46)
Tools Required:
•
Panel Removal Tool
•
Flat Head screwdriver
•
Crimping Tool / Wire Cutters
•
Metric Socket Set
•
Brain
We’re going to proceed as follows:
1.
Disassembling the trunk
2.
Power/ground wire connections
3.
Making appropriate wiring connections for audio inputs
4.
Installing the subwoofer enclosure
5.
Tuning/testing the system
Disassembling the Trunk Panels:
If your Sedan has fold down seats, we will only need to remove the carpeting from the Driver’s Side
of the trunk. If it does not, it’s easiest to remove the entire trunk lining.
If your vehicle is HK equipped, you’ll need to remove your factory subwoofers prior to installing the
D110 enclosure. Simply remove the four 8mm bolts that secure each enclosure to the rear deck and
tuck the wiring harnesses back into the rear deck.
1.
Begin by removing all items from the trunk of the vehicle. Make sure that all tail lights are
in working order. If not, now is a good time to replace them. Also remove the carpet that
covers the floor of the trunk, as it will reveal several fasteners that will need removing.
2.
Start by removing the taillight covers on both sides of the vehicle. Turn the knob on each
taillight counter clock-wise until the cover becomes loose (Figure 1).
1 of 13
Any reproduction, distribution, modification, or dissemination of these instructions without written permission from Bavarian Soundwerks is
expressly forbidden and a violation of international copyright law. Any violation will result in prosecution to the full extent available under the
law!
© Bavarian Soundwerks, LLC.
2195 Defoor Hills Rd., Suite D, Atlanta, GA 30318
P: 404.963.8857 |
www.bavsound.com
