manualshive.com logo in svg

Baur DTA 100 C, User Manual, Page: 71 / 90

Share
Download
Baur DTA 100 C User Manual Download Page 71

 

 

DTA 100 C 

Maintenance 

822-129-8 

71 / 90 

     

 

  DANGER   

Dangerous electric voltage

 

Danger to life or risk of injury due to electric shock 

  Work on electrical devices may only be performed by qualified 

technical staff.   

     

NOTICE   

Damage to device due to improper handling

 

The user is liable for damages caused due to improper maintenance or care. 

  Never take apart the device. This can lead to device damages. Inside the device 

there are no components that could be serviced or repaired by the user.   

  Maintenance tasks must be carried out only by personnel trained and authorised 

by BAUR 

 

     

NOTICE   

Material damage caused by unauthorised spare parts

 

  Use only accessories and original spare parts recommended by BAUR. The use 

of spare parts, accessories and special fittings that have not been tested and 
approved by BAUR could adversely affect the safety, function and features of the 
product.   

The use of any unauthorised spare parts will invalidate the warranty. 

     

 

16 

M

AINTENANCE

 

Summary of Contents for DTA 100 C



























































































Reviews:

No comments