Post Hole Digger BPX900
E&OE
©2017 Bäumr-AG
6
Equipment Safety
Post hole diggers
are high-speed, fast-cutting equipment with exposed blades that can cause
serious injury if not used correctly or without taking proper safety precautions.
It is
extremely important that you read and fully understand the information in this section and all other
safety warnings / recommendations and usage instructions before using the equipment
.
Operator
•
If you are untrained in the use of a hole digger, it is highly recommended that you be trained/instructed
by a suitably qualified or experienced post hole digger user before using the machine.
•
Fully understand how to safely operate the machine and the digging process. See Post Hole Digger
Operation.
•
You must be in good physical condition to use a digger. NEVER operate the machine when tired, or
under the influence of any substance (medication, alcohol, drugs etc) that may impair your judgement,
alertness, physical strength, vision or dexterity.
•
Maintain sure-footing and balance always when using or handling the digger and have full awareness of
your surroundings and any possible hazards.
•
Prolonged digger use may lead to health complications, such as carpal tunnel syndrome, due to
vibration. To help reduce the possibility of such conditions, wear gloves, take breaks frequently, keep
fingers and hands warm, and maintain the equipment for optimal operation and minimal vibration. It is
recommended to seek medical advice if you feel numbness or burning sensations in fingers/hands.
Clothing and Protective Equipment – All Operators and Assistants
•
Wear approved safety goggles, or safety glasses with adequate top and side protection..
•
Wear suitable hearing protection.
•
Wear heavy-duty, non-slip leather or protective gloves.
•
Wear approved heavy-duty safety boots, with steel toe-caps and non-slip soles.
•
Wear suitable overalls or work clothing that fits snugly, but does not restrict movement. Avoid loose
fitting clothing, scarves, jewellery etc and keep long hair contained to avoid getting caught or pulled by
the chainsaw or by tree branches etc.
Work Area Safety
•
Use EXTREME CAUTION to avoid power cables – contact can be fatal. Also be aware of plumbing,
water and gas pipes etc. If in any doubt, do NOT dig – contact the appropriate organisation or authority
for information before digging.
•
Be aware of fire risks resulting from machine use. Ensure that the machine exhaust and spark arrestor (if
equipped) is well maintained and that engine is tuned correctly.
•
Refuel outdoors only. Avoid fuel spillage. Start the machine at least 3m (10') away from the fuelling
location.
Operational Safety
•
Do NOT use the machine if the throttle or any safety guard or mechanism is not installed or is not
operating correctly – have the machine inspected and repaired at an authorised service centre before
using it again.
•
Always hold the machine firmly with both hands during operation. Always use the machine handles.
•
Do NOT use any auger attachment that is cracked or damaged in any way – replace it.
•
Ensure the auger is not obstructed before digging.
•
Ensure that all auger attachments are fully secured before digging.
•
If the auger jams, release the throttle trigger and stop the engine immediately.
