PA408
16
www.baumer.com
6 Programmierebene über Code schützen
Die Programmierung kann gegen ungewünschte Änderungen durch
einen Code geschützt werden:
-entweder vollständig
wenn die Programmierung geschützt ist, hat man immer noch die
Möglichkeit die verschiedene Konfigurationsmodule zu visualisieren
aber nicht zu ändern. In diesem Fall wird [DAtA] anstelle von [Pro]
angezeigt wenn man in den Programmiermodus einsteigt.
- oder teilweise
durch selektieren der verschiedenen Konfigurationsmodule, die ge-
schützt werden sollen. Auch hier hat man die Möglichkeit die verschie-
dene Konfigurationsmodule zu visualisieren aber nicht zu ändern.
Code eingeben oder ändern
1. Taste 3 sek. drücken, [CodE] erscheint in der Anzeige und die
LED PROG blinkt.
2. Mit Taste und den Code eingeben. Der Default Wert nach
Auslieferung des Gerätes ist „0000“.
3. Mit der Taste besteht die Möglichkeit entweder LiSt oder CHAn
zu wählen.
Bei Auswahl LiSt kann in den weiteren Zeilen bestimmt werden
für welche Konfigurationsmodule der Zugriff zum ändern über
Code geschützt wird.
Bei Auswahl CHAn kann der Code geändert werden.
Konfigurationsmodule schützen
Code ändern
Vollständige Verriegelung
Nein, die verschiedene Konfigurationsmodule können Einzel ge-
schützt werden.
Ja, alle Konfigurationsmodule sind zum ändern geschützt, und das
Gerät verlässt die Programmierebene.
Wenn bei Vollständige Verriegelung „no“ gewählt wurde, kann hier
für jedes der 4 folgenden Konfigurationsmodule mit no oder YES
bestimmt werden ob das Modul geschützt wird ja oder nein.
Konfiguration Grenzwert 1
Konfiguration Grenzwert 2
Konfiguration Eingangssignal
Konfiguration der Anzeige
Die Zeilen SEt1 und SEt2 erscheinen nur wenn das Geräte die
Relaisausgänge beinhaltet.
Code
Hier kann der Code geändert werden, das Gerät speichert den neuen
Code und verlässt die Programmierebene.
Summary of Contents for PA408
Page 20: ...PA408 20 www baumer com ...
Page 40: ...PA408 40 www baumer com ...
Page 60: ...PA408 60 www baumer com ...