PA408
34
www.baumer.com
Second measured value
Enter value. Same input range as in InP1.
Displayed value correlated to second measured value
The entered value will appear in the display once the input signal has
achieved the second measured value. Same input range as in InP1.
Decimal point position related to dSP1 is defined.
4.2.2 Teach scaling mode
First measured value
The input signal value is adopted.
Displayed value correlated to second measured value
The entered value appears in the display once the input signal has
achieved the second measured value. Value input from -9999 to 9999
in 14 mm displays and from -1999 to 9999 in 20 mm displays.
Decimal point dSP1
Position of the decimal point (related to dSP1).
Second measured value
The input signal value is adopted.
Displayed value correlated to second measured value
The entered value appears in the display once the input signal has
achieved the second measured value. Same input range as in InP1.
Decimal point position related to dSP1 is defined.
4.2.3 Display stabilization filter
Filter parameter
Configurable from 0 to 9 by key.
The stabilization filter will balance fluctuations caused by instable
input signals. The higher the filter parameter, the more delay in the
display’s reaction time. 0 means filter not enable.
4.3 Limit output configuration
Press to select the required option which comes with an abbre-
viation.
Limit 1
Limit 2
Summary of Contents for PA408
Page 20: ...PA408 20 www baumer com ...
Page 40: ...PA408 40 www baumer com ...
Page 60: ...PA408 60 www baumer com ...