PA408
www.baumer.com
11
Programmiervorgang
1. Die Taste drücken, [Pro] wird angezeigt für den Einstieg in die
Programmierung. Nach wiederholtem Tastendruck erscheint das
erste Konfigurationsmodul.
2. Mit Taste das gewünschte Konfigurationsmodul anwählen. Die
verschiedenen Module sind mit einer Kurzbezeichnung gekenn-
zeichnet. (InP, dSP, Set)
3. Mit Taste in das gewünschte Konfigurationsmodul einsteigen
und mittels , und Tasten die gewünschten Funktionen pro-
grammieren. Nach der Programmierung eines Konfigurationsmo-
duls wird kurz [Stor] angezeigt, die geänderten Parameter werden
gespeichert und das Gerät verlässt automatisch die Programmie-
rebene.
4. Wenn nötig die weiteren Konfigurationsmodule programmieren.
Überblick Konfigurationsmodule
Konfiguration
Eingangssignal
Konfiguration der
Anzeige
Konfiguration der
Grenzwertausgänge
Das Konfigurationsmodul für die Grenzwertausgänge erscheint nur
wenn das Gerät diese Option beinhaltet.
4.1 Eingangskonfiguration
Im ersten Schritt des Moduls muss mit der Taste die Art des Ein-
gangssignals ProC, tEMP, Pot oder rES ausgewählt werden.
Eingang Prozess Normsignale
Eingang Thermoelement, Pt 100, Pt1000
Eingang Potentiometer
Eingang Widerstand
Summary of Contents for PA408
Page 20: ...PA408 20 www baumer com ...
Page 40: ...PA408 40 www baumer com ...
Page 60: ...PA408 60 www baumer com ...