Baumer Hubner HENQ 1100, Operating Instructions Manual

Page: 18 / 36

OPERATION / MENU DESCRIPTION
15/32 MB112EN - 11185046, 19A1, Baumer_HENQ1100_OI_EN
7.2 Menu description
7.2.1 Parameter setting (menu )
The HENQ 1100 makes provision for the attachment of any encoder with TTL
(RS422), HTL or SinCos output signals�
The encoder data are entered in menu
as follows:
If the device is used in conjunction with encoders from Baumer Hübner, then the
appropriate type (
1
-
40
) can be selected in the menu item
ENCODER
, see Fig.5, page
16 . Because of the large number of Baumer Hübner encoder types, the field for
selection is restricted to the most common models available at present� When the
encoder type has been selected, the parameters
MaxSpeed
,
inv.Sig.
,
Zero-
Puls
,
with K2
,
RefLevel
and
Pulse-No
are displayed for checking�
If your encoder is not present in the selection menu, select ‘
0
’ (User Setting, see
Fig.6, page 16 ) in the menu item
ENCODER
� Then you can set the encoder para-
meters through the menu items
inv.Sig.
,
ZeroPuls
,
with K2
,
RefLevel
and
Pulse-No
, seee
Fig.4, page 16
+
Fig.5, page 16
, individually by hand�
It is also possible to edit the encoder database by using the ”config“ key, see
Fig.7, page 18 � In the following submenu, the parameters encoder name
#############
,
MaxSpeed
,
inv.Sig.
,
ZeroPuls
,
with K2
,
RefLevel
and
Pulse-No
can be set individually�
Fig.2: Display menu picture 1
Errors
:
on
/
off
off
: Error messages will be disabled (for
error search)�
MaxSpeed
:
#####
Maximum speed
Glitch
:
#
0 ≤
#
≤ 7 Settings of the glitch filter see sec-
tion 7.2.1.1 �
MS_Error
:
##:##
Pulse/pause error: setting the max� deviation�