Baumer Hübner
Disassembly
|
7
V1 | PMG10 & PMG10P CANopen
Operating Manual
31
7
Disassembly
NOTICE
Equipment damage due to mechanical impact
Strong vibration may lead to overload by constraining force.
a) Never apply force. If properly performed, all components can be uninstalled smoothly.
b) Use only suitable tools to uninstall.
NOTICE
Equipment damage by adhering liquids
Sticky liquids may damage sensing unit and ball bearings. Disassembling a device which is
stuck to the axis can lead to destruction.
a) Do not use adhesive liquids to fasten the device.
7.1
Uninstall when using EURO flange B10
7.1.1
Uninstall encoder from drive shaft
DANGER
Burns caused by heat
The device heats up at high speeds. There is a risk of getting burned after use.
a) Avoid overheating the device.
b) Wear suitable protective gloves and clothing.