37
o
If you are not going to use the plug that is fitted to the power
cable, then the dishwasher should be wired into a 3A double pole
switched fused spur outlet, having 3 mm contact separation and
placed in an easily accessible position adjacent to the appliance.
The spur outlet must still be accessible even when your
dishwasher is located in its housing.
o
Broken or damaged power leads must only be replaced by a
suitably qualified person. A power lead of a similar type must be
used in replacement.
IMPORTANT: We do not recommend that this appliance is connected
to an extension lead.
Before first use
You should check the following before using the appliance for the first
time:-
o
That the dishwasher is level and fixed in position.
o
That the water tap is fully open.
o
That there are no leaks at either end of the drain or inlet hoses.
o
That the inlet and drain hoses are fully tightened.
o
That the inlet and drain hoses are not kinked.
o
That the power is switched on.
o
That the water softener has been filled with 1 litre of water and
filled with dishwasher salt.
o
That the rinse aid dispenser has been filled.
