o
Open the door of the dishwasher and remove the basket. The
basket should be empty when you remove it.
o
Turn the water softener cap anticlockwise and remove it (1).
o
Pour 1 litre of water into the water softener.
IMPORTANT: It is only necessary to do this when you fill
the container with salt for the first time.
o
Ensure that the supplied funnel is positioned correctly.
o
Pour salt into the water softener, you should add approximately
1 kg of salt into the water softener (2).
o
It is perfectly normal for a small amount of water to come out of
the water softener, whilst you are filling it with salt. This does
not mean that the water softener is filled with the correct
amount of salt.
o
Refit and fully tighten the water softener cap.
o
To remove any excess salt that may have spilled out of the
water softener, we would recommend that the RAPID wash
program is completed afterwards.
o
When the salt required neon (2) lights on the control panel, then
you should follow the “filling with dishwasher salt” procedure
again.
o
IMPORTANT: You do not need to pour 1 litre of water into
the container when you subsequently fill the water
softener with salt.
12
